3500/22M 138607-01 BENTLY 标准瞬态数据接口模块

3500 TDI(暂态数接口)是3500之间的接口监控系统GE的system 1*机械管理软件。的TD结合了3,500 /20机架接口模块(RIM)的能力数据收集能力的通信处理器，如TDXnet，TD与M系列一起在3500机的RIM插槽中运监视器(3500/40M,3500/42M等)连续采集稳态和暂态波形数据并将该数据通过以太网辩路传递给主机软性(请参阅本文档未尾的兼容性部分。静本数据捕获是TD的标准面置，但是使用一人可选的通道启用磁盘将允许TDI捕获动态或瞬态数据。的与以前的通信相比，TD在几个方面进行了改进并将通信处理器功能集成到3500架

3500/22M 138607-01 BENTLY 标准瞬态数据接口模块

尽管TDI提供了整个机架通用的某些功能，但它并不是部分关键监控路径，对正常、正常无影响整个监控系统的运行，每3500机架需要一个TDI或RIM，它总是占用槽位1(电源旁边)。对于二模几余(TMR)应用，3500系统需要一个TMR版本的TD1。除了所有标准TD功外，TMR TDI还执行"监视通道比较”。3500tm配置使用监控选项中***的设置执行监控器投票，使用在这种方法中，TMR TD不断地比较三(3)的输出。多余的监视。如果T检测到来自其中一个的信息监视器不再等同于其他监视器(在配置的***比内)两个监视器，它将监视器标记为错误，并将事件放置在系统事件列表。

3500/22M 138607-01 BENTLY Standard transient data interface module

3500 TDI(Transient Number Interface) is the system 1* mechanical management software for the interface monitoring system GE between 3500. The TD combines the data collection capabilities of 3500/20 rack interface modules (RIM) with communications processors such as TDXnet, Together with the M Series, the TD operates a monitor (3500/40m, 3500/42m, etc.) in the RIM slot of the 3500 machine to continuously collect steady-state and transient waveform data and pass this data over Ethernet routing to the host soft (see the compatibility section at the end of this document). Dead book data capture is standard for TDS, but enabling a disk with a one-person optional channel will allow TDI to capture dynamic or transient data. Compared to previous communications, TD has improved in several aspects and integrated communication processor capabilities into 3,500 units

3500/22M 138607-01 BENTLY Standard transient data interface module

Although TDI provides certain functions common to the entire rack, it is not part of the critical monitoring path and has no impact on the normal, normal operation of the entire monitoring system, every 3500 racks need a TDI or RIM, it always occupies slot 1(next to the power supply). For two-mode redundant (TMR) applications, the 3500 system requires a TMR version of TD1. In addition to all standard TD functions, the TMR TDI also performs a "monitor channel compar***n." The 3500tm configuration performs monitor voting using the Settings specified in the monitoring options, using this method, the TMR TD constantly compares the outputs of three (3). Extra surveillance. If T detects that the information monitor from one of the two monitors is no longer equivalent to the other monitors (within a configured percentage), it marks the monitor as an error and places the event in the system event list.