MMS6110 双通道轴振动测量模件

MMS6110是双通道轴振动测量模块，特点：双通道轴振动测量模块，监测轴的径向相对振动。可在运行中更换，可单独使用，冗余电源输入。扩展的自检功能，内置传感器自检功能，口令保护操作级。适用涡流传感器PR642./..系列加前置器CON0X1。RS232/485端口用于现场组态及通讯，可读出测量值。内置线性化处理器。记录和存储zui近一次起/停机的测量数据。

双通道轴振动测量模块MMS6110, 使用涡流传感器的输出测量轴径向的相对振动,每个通道可独立使用：这种模块的测量可以和其它模块的测量一起组成涡轮机械保护系统, 以及作为输入提供给分析诊断系统、现场总线系统、分散控制系统、电厂/主计算机、网络如：WAN/LAN网、以太网。对于蒸汽机、燃汽机、水轮机、压缩机、风扇、离心机以及其它涡轮机械，使用本系统可提高使用效率、运行安全性和延长机械使用寿命。

MMS6110 is a dual channel shaft vibration measurement module, characterized by a dual channel shaft vibration measurement module that monitors the radial relative vibration of the shaft. Can be replaced during operation, can be used separately, with redundant power input. Expanded self check function, built-in sensor self check function, password protected operation level. Applicable to eddy current sensor PR642./.. Series with a preamplifier CON0X1. The RS232/485 port is used for on-site configuration and communication, and can read measurement values. Built in linearization processor. Record and store the measurement data of the last start/stop of Zui.

The dual channel shaft vibration measurement module MMS6110 uses the output of eddy current sensors to measure the relative radial vibration of the shaft, and each channel can be used independently. The measurement of this module can be combined with the measurement of other modules to form a turbine machinery protection system, and can be provided as input to analysis and diagnosis systems, fieldbus systems, distributed control systems, power plants/main computers, networks such as WAN/LAN networks, Ethernet. For steam engines, gas turbines, water turbines, compressors, fans, centrifuges, and other turbine machinery, the use of this system can improve efficiency, operational safety, and extend the service life of the machinery.